EV Female Combo 2 CCS Type 2 Socket 62196-3 Electric Car Charging DC150A 850V DC
Product Introduction
The CCS combines single-phase with rapid three-phase charging using alternating current at a maximum of 43 kilowatts (kW), as well as direct-current charging at a maximum of 200 kW and the future perspective of up to 350 kW – all in a single system. As a result, it provides a solution to all necessary charging requirements. The Combo CCS2 charging connectors are available in 60A to 200A. It’s combined alternating current (AC) Type 2 charging and direct current (DC) CCS fast charge in one inlet. It is used at vehicle side.
Product Features
| Charging power | 200 kW |
| Rated current AC | 32 A AC |
| Rated current DC | 250 A DC |
| Rated current Signal Contact | 2A |
| Rated voltage AC | 480 V AC |
| Rated voltage DC | 1000 V DC |
| Rated voltage Signal Contact | 30 V AC |
| Type of charging current | AC 3-phase |
| MECHANICAL PROPERTIES | |
| Insertion force | < 100 N |
| Insertion/withdrawal cycles | > 10000 |
| Operate force | Less than 100N |
| Withdrawal force | < 100 N |
| STANDARD & CLASSIFICATIONS | |
| Charging standard | CCS type 2 |
| ETIM | EC002898 |
| Standard | IEC 62196-2 & IEC 62196-3 |
| UNSPSC | 39121800 |
| AMBIENT PROPERTIES | |
| IP protection class | IP 55 (Working condition) |
| Operating Temperature | -30C to +65C |
| Temperature monitoring | AC contacts: PTC chain (DIN˽EN˽60738-1) |
| CABLE PROPERTIES | |
| Outer Shell | Thermoplastic material, fire rating UL94-0 |
Specification
| SPECIFICATIONS | |
| Application | Vehicle Charging Inlet for charging with alternating current (AC) and with direct current (DC) |
| Charging mode | Mode 2, 3, 4 |
| Coding | 4.7 kΩ (between PE and PP) |
| Conductive terminal | Cooper alloy pins , sliver plated on surface |
| Contact Resistance | 0.5m ohm Max |
| Insulation resistance | 2000MΩ (DC1000V) for CCS Type 2 charging connector |
| Locking type | Locking in the inserted state with a locking mechanism |
| Mechanical Parameter | Tested no-load plug in / plug out > 10000 times life cycle |
| Number of Pins | 7 (L1, L2, L3, N, PE, DC+, DC-) |
| Signal Contact | 2 (CP, PP) |
| Temp. Attachment point | 2 sensors for the DC contacts |
| Temp. Sensor type | Pt 1000 |
| Temp. Standards/regulations | DIN EN 60751 |
| Temperature measurement | DC contacts: 2x PT1000 (DIN EN 60751) |
| Temperature Resistance | < 50K |
| Type of cover movement | Self-locking |
| Type of signal transmission | PWM with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
TAGS
125A CCS Type 2
150A CCS Combo 2
200A CCS Combo 2
80A CCS Type 2
150A Combo 2 Socket
200A Combo 2 Socket
CCS 2 Socket
CCS Combo 2 Socket
Combo 2 Inlets
Write your message here and send it to us